LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electronic Control Modules (Service Information)) >> Powertrain Control Module >> Installation >> Installation - RHD

Installation - RHD

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Control Modules & Components
GC0034988Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the PCM harness electrical connector to the powertrain control module (2).
  2. Install the powertrain control module into the control module box (5).
  3. Install the plastic control module box cover (1) and slide the clips rearward to lock the cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals