LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Audio) >> Speaker >> Installation

Section 34 (Audio): Speaker: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install wire harness connector.
  2. Place speaker into instrument panel.
  3. Install speaker grille.
  4. Install the A-pillar trim. (Refer to BODY/INTERIOR/A-PILLAR TRIM - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals