Lock Cylinder: Removal

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

Remove the three screws and position aside the lock cylinder cable bracket. See Figure
Remove the nut and remove the lock cylinder. See Fig 1

Fig 1: Lock Cylinder

Courtesy of DAIMLERCHRYSLER CORP.

1 - DECKLID

2 - LICENSE PLATE SCREW

3 - RIVET NUT

4 - LOCK SET

5 - LOCK CYLINDER GASKET

6 - SPECIAL LOCK CYLINDER NUT