LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems >> Controls >> Blower Motor Power Module >> Installation

Blower Motor Power Module: Installation

  1. Position the blower motor power module into the bottom of the HVAC housing.
  2. Install the two screws that secure the blower motor power module to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the two wire connectors to the blower motor power module.
  4. Install the silencer panel to the right side of the instrument panel (Refer to BODY/INSTRUMENT PANEL/RIGHT IP SILENCER PANEL - INSTALLATION) .
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals