LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems >> Controls >> Ambient Temperature Sensor >> Removal

Ambient Temperature Sensor: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the push pin that secures the ambient temperature sensor to the inside of the front bumper beam. See Fig 1.
  3. Disconnect the wire harness connector from the ambient temperature sensor and remove the sensor.
Fig 1: Removing/Installing Ambient Air Temperature Sensor
GC0011016Courtesy of DAIMLERCHRYSLER CORP.
1 - AMBIENT TEMPERATURE SENSOR
2 - WIRING HARNESS CONNECTOR
3 - PUSH PIN
scientia non olet · About LEMON Manuals