LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems >> Controls >> Ambient Temperature Sensor >> Installation

Ambient Temperature Sensor: Installation

  1. Connect the wire harness connector to the ambient temperature sensor.
  2. Position the ambient temperature sensor to the inside of the front bumper beam.
  3. Install the push pin that secures the temperature sensor to the bumper beam.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals