LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Anti-Lock Brake System (Service Information)) >> Yaw Rate/Lateral Acceleration Sensor >> Installation

Yaw Rate/Lateral Acceleration Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Yaw Rate/Lateral Acceleration Sensor
GC0033919Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the yaw rate/lateral acceleration sensor (1). Tighten the nuts to 10 N.m (89 in. lbs.).
  2. Connect the yaw rate/lateral acceleration harness connector.
  3. Install the rear center console. (Refer to BODY/INTERIOR/CENTER CONSOLE - INSTALLATION) .
scientia non olet · About LEMON Manuals