LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Ignition System (Service Information)) >> Camshaft Position Sensor >> Installation

Camshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inspecting Camshaft Position Sensor O-Ring For Damage
GC0035087Courtesy of DAIMLERCHRYSLER CORP.
NOTE: Lubricate the camshaft position sensor O-ring with engine oil.
  1. Inspect the camshaft position sensor O-ring (1) for damage.
  2. Lubricate the camshaft position sensor O-ring as necessary.
    Fig 2: Identifying Camshaft Position Sensor Harness Connector & Bolt
    GC0034419Courtesy of DAIMLERCHRYSLER CORP.
  3. Position the camshaft position sensor on the cylinder head.
  4. Install the retaining bolt (2). Tighten the retaining bolt to 8 N.m (71 in. lbs.).
  5. Connect the camshaft position sensor harness connector (1).
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals