Check Valve: Description
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INLET NIPPLE |
| 2 - CHECK VALVE |
| 3 - OUTLET NIPPLE (2) |
A single washer system check valve is standard equipment on this model, and is installed in the washer system plumbing. See Fig 1. The check valve is integral to the washer plumbing fitting located on the underside of the cowl top panel behind the rear of the hood panel opening in the engine compartment. The check valve consists of a molded plastic body with three barbed hose nipples, one at the inlet side of the valve body and two at the outlet side. The check valve cannot be adjusted or repaired and, if faulty or damaged, it must be replaced.