Crankshaft Position Sensor: Removal
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Unplug the crankshaft wiring harness connector.
- Remove the crankshaft sensor retaining bolt and remove sensor. See Fig 1.
| 1 - ENGINE BLOCK |
| 2 - WIRING HARNESS CONNECTOR |
| 3 - CRANKSHAFT POSITION SENSOR |
| 4 - STARTER SOLENOID |