Camshaft Position Sensor: Removal
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable.
- Remove engine cover
- Disconnect camshaft position sensor electrical connector. See Fig 1.
- Remove retaining bolt and remove sensor. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - WIRING HARNESS CONNECTOR |
| 2 - CAM POSITION SENSOR |
| 3 - O-RING |
| 4 - CYLINDER HEAD COVER |