Section 109 (Clutch System): Cylinder-Master: Installation
WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
- Twist clutch master cylinder a quarter turn clockwise to install into toe box.
- Connect hydraulic line quick connector to clutch bell housing.
- Install clutch fluid reservoir mounting screws.
- Install left inner fender.
- Connect clutch pedal position switch connector.
- Install new anti-rotation pin.
- Install master cylinder actuation rod to clutch pedal clip.
- Bleed system.