Removal - 2.7L

Disconnect negative cable from battery
Disconnect electrical connectors from throttle body. See Fig 1.

Fig 1: TPS AND INLET AIR TEMP. SENSOR 2.7L
Courtesy of DAIMLERCHRYSLER CORP.

1 - Throttle Position Sensor

2 - Inlet Air Temperature Sensor
Disconnect clean air hose from throttle body.
Remove the throttle cable shield. See Fig 2.

Fig 2: THROTTLE SHIELD 2.7L
Courtesy of DAIMLERCHRYSLER CORP.
Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm. See Fig 3.

Fig 3: THROTTLE CABLES 2.7L
Courtesy of DAIMLERCHRYSLER CORP.
Remove throttle cable bracket.
Remove the throttle body support bracket from the bottom of the throttle body. See Fig 4.

Fig 4: THROTTLE BODY SUPPORT BRACKET 2.7L
Courtesy of DAIMLERCHRYSLER CORP.
Remove remaining 2 throttle body bolts. See Fig 5.

Fig 5: THROTTLE BODY 2.7L
Courtesy of DAIMLERCHRYSLER CORP.
Remove throttle body.
Clean mating surfaces.