Wheel Alignment: Operation: Camber
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Camber is the inward or outward tilt of the wheel relative to the center of the vehicle. Tilting the top of the wheel inward provides negative camber (NEG.). Tilting the top of the wheel outward provides positive camber (POS.). Incorrect camber will cause wear on the inside or outside edge of the tire. (1) Indicates the spring location. (2) Is the eccentric repair bolt for adjusting camber.
- +3 mm Range of adjustment +/-25' Camber.