Checking And Adjusting Rear Axle Toe

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Cam Bolts For Adjusting Rear Axle Toe

Courtesy of DAIMLERCHRYSLER CORP.

Check the vehicle level at the front and rear axles and adjust if necessary. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
Check the vehicle level at the front and rear axles with an electronic inclinometer and adjust if necessary. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
Adjust the toe with the cam bolt on the mounting of the left and right tie rod on rear axle carrier.