Throttle Body: Removal: 3.8L
- Disconnect negative cable from battery
- Remove the air cleaner box, (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) - 3.5L, (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) - 3.8L .
- Remove throttle and speed control cables. See Fig 1.
- Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm. See Fig 2.
1 - Purge Line 2 - Throttle Position Sensor 3 - Idle Air Control Motor - Disconnect electrical connectors and purge line from throttle body. See Fig 3.
- Remove 3 throttle body bolts.
- Remove throttle body. See Fig 4.
- Clean mating surfaces.