LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Engine Block Heater >> Removal

Engine Block Heater: Removal

  1. Drain coolant from radiator and cylinder block (Refer to COOLING - STANDARD PROCEDURE) .
  2. Disconnect the power cord plug from heater.
  3. Loosen bolt. Remove the block heater assembly. See Fig 1.
Fig 1: Block Heater
GC0001721Courtesy of DAIMLERCHRYSLER CORP.
1 - BLOCK HEATER1
2 - ELECTRICAL CONNECTOR
2 - BOLT
scientia non olet · About LEMON Manuals