Idle Air Control Motor: Installation: 3.5L

Fig 1: IAC Motor O-Rings

Courtesy of DAIMLERCHRYSLER CORP.

When servicing throttle body components, always reassemble components with new O-rings and seals where applicable. If assembly of component is difficult, a light coat of engine oil may be applied to the O-RINGS ONLY. See  Fig 1  to aid assembly.

Fig 2: Idle Air Control Motor

Courtesy of DAIMLERCHRYSLER CORP.

1. Install the IAC to the throttle body. See Fig 2.
2. Tighten mounting screw to 5.5 N.m (49 in. lbs.) torque.
3. Attach electrical connector to the IAC.
4. Connect the negative battery cable.