LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Pacifica Base, 3.5 4, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Navigation System & Telecommunication System >> Antenna Cable - Navigation >> Installation

Antenna Cable - Navigation: Installation

  1. Connect antenna cable at instrument panel. Install cable to retainers on floor. Connect antenna cable to navigation unit.
  2. Install navigation unit (Refer to ELECTRICAL/NAVIGATION/TELECOMMUNICATION/NAVIGATION UNIT - INSTALLATION) .
  3. Install liftgate scuff plate (Refer to BODY/INTERIOR/LIFTGATE SCUFF PLATE - INSTALLATION) .
  4. Install quarter trim panel (Refer to BODY/INTERIOR/QUARTER TRIM PANEL - INSTALLATION) .
  5. Install front and rear scuff plates (Refer to FRONT DOOR SILL SCUFF PLATE - INSTALLATION and REAR DOOR SCUFF PLATE - INSTALLATION ).
  6. Install side cowl trim (Refer to COWL SIDE TRIM PANEL - INSTALLATION).
  7. Connect battery negative cable.
scientia non olet · About LEMON Manuals