LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Pacifica Base, 3.5 4, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Passenger Airbag >> Removal

Passenger Airbag: Removal

  1. Open hood, disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
  3. Remove the glove box assembly (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL) .
  4. Using a long screwdriver or equivalent, reach up on both sides of the passenger airbag to remove the screws that secure it to the instrument panel pad and door. See Figure.
  5. Remove the two lower screws attaching the passenger airbag to the crosscar beam. See Figure.
  6. Disconnect the passenger airbag electrical connector located on the inboard side of the passenger airbag, attached to the instrument panel steel reinforcement. See Figure.
  7. Pull the passenger airbag rearward and down. Maneuver it enough to clear all obstacles and remove through the glove box opening. See Figure.
scientia non olet · About LEMON Manuals