LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 4D Wagon, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Container-Coolant Recovery >> Installation >> Installation >> Non - Turbo

Non - Turbo

Fig 1: Coolant Recovery Container
GC0019849Courtesy of DAIMLERCHRYSLER CORP.
1 - COOLANT RECOVERY CONTAINER
2 - SCREW
3 - NUT
  1. Install coolant recovery container (1) and tighten fasteners to 4 N.m (35 in. lbs.). See Fig 1.
  2. To ensure proper vent hose routing, install vent hose clip on stud at dash panel.
    Fig 2: Overflow Hose Routing
    GC0021841Courtesy of DAIMLERCHRYSLER CORP.
    1 - PRESSURE CAP
    2 - OVERFLOW HOSE
    3 - COOLANT RECOVERY CONTAINER
  3. Connect the MAP sensor connector.
  4. Position and install the power steering fluid reservoir bracket fasteners.
  5. Connect overflow hose (2) to coolant outlet connector. See Fig 2.
  6. Fill container to proper level.
scientia non olet · About LEMON Manuals