Diesel And Turbo Models

Fig 1: Removing/Installing Concentric Slave Cylinder (CSC)

Courtesy of DAIMLERCHRYSLER CORP.

1 - CONCENTRIC SLAVE CYLINDER

Install slave cylinder (1) to transaxle using new bolts. See Fig 1.
NOTE: Torque three CSC body screws first, then torque the fluid tube attachment.
Torque slave cylinder-to-case bolts in three steps:
1. 2 N.m (18 in. lbs.)
2. 5 N.m (44 in. lbs.)
3. 8.4 N.m (74 in. lbs.)
Install transaxle,
- For G288 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) .
- For T350 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) .
Bleed clutch hydraulic system. (Refer to CLUTCH - STANDARD PROCEDURE) .