1.6L Engine

Fig 1: Radiator Fan Shroud - Mounting

Courtesy of DAIMLERCHRYSLER CORP.

1 - RADIATOR FAN SHROUD

2 - SCREWS

3 - SCREWS

Install the radiator fan into position on the radiator.
Install the upper and right side radiator fan retaining screws (2) and tighten to 6 N.m (55 in. lbs.). See Fig 1.

Raise vehicle and install the remaining fan attaching screws (3). Tighten to 6 N.m (55 in. lbs.).

Fig 2: Radiator Assembly

Courtesy of DAIMLERCHRYSLER CORP.

1 - OVERFLOW HOSE

2 - UPPER RADIATOR HOSE

3 - RADIATOR ASSEMBLY

Connect radiator fan electrical connector.
Lower vehicle.
Install radiator filler neck to radiator. Connect upper radiator hose (2) and overflow hose (1) to radiator filler neck. See Fig 2.
Install upper radiator closure panel, (Refer to BODY/EXTERIOR/RADIATOR CLOSURE PANEL - INSTALLATION) .
Install grille, (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .
Connect negative battery cable.
Fill the cooling system, (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .