Ignition System (Service Information): Coil-Ignition: Removal: 1.6L

NOTE: The 1.6L is attached with a rubber isolator system. Care must be exercised in retaining all the pieces and reinstalling in the order they where removed.

Fig 1: Inlet Air Temp. Sensor - 1.6L

Courtesy of DAIMLERCHRYSLER CORP.

1. Disconnect the negative battery cable.
2. Disconnect the electrical connector at the throttle body.
3. Remove the purge hose from throttle body.
4. Remove air cleaner assembly cover and disconnect the inlet air temperature sensor.
   Fig 2: Upper Manifold Bolts

   Courtesy of DAIMLERCHRYSLER CORP.
5. Remove the 4 mounting bolts from the upper to lower manifold.
6. Remove the PCV hose and the brake booster hose from the upper manifold.
   Fig 3: Front Strut Bolts Upper Intake

   Courtesy of DAIMLERCHRYSLER CORP.
7. Remove the 2 bolts to the upper manifold to struts.
   Fig 4: Rear Strut Bolts Upper Intake

   Courtesy of DAIMLERCHRYSLER CORP.
8. Remove the 2 bolts to the upper manifold to struts.
   Fig 5: Removing/Installing Ignition Coil

   Courtesy of DAIMLERCHRYSLER CORP.
9. Remove the 4 bolts from the ignition coil. See Fig 5.
10. Remove the spark plug cables from the ignition coil.