LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection (Except Diesel) >> O2 Sensor >> Removal >> 2.4L Turbo/2.4L SRT-4

2.4L Turbo/2.4L SRT-4

Fig 1: Upstream O2 Sensor- 2.4L Turbo
GC0019486Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Unlock and disconnect the electrical connector. It is on the passenger side near the EVAP purge solenoid.
  3. Raise vehicle and support.
  4. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent
scientia non olet · About LEMON Manuals