LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Message Center >> Universal Transmitter >> Description

Universal Transmitter: Description

Fig 1: Visor With Universal Transmitter
GC0022948Courtesy of DAIMLERCHRYSLER CORP.

Some vehicles are equipped with a Universal Transmitter transceiver. The universal transmitter transceiver is located in the drivers side sun visor assembly. The only visible component of the universal transmitter are the three transmitter push buttons. The three universal transmitter push buttons are identified with raised buttons and contain a transmit indicator that lights during operation and programming functions.

Each of the three universal transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security systems or just about any other device that can be equipped with a radio receiver in the 280 to 435 MegaHertz (MHz) frequency range for remote operation. The universal transmitter is capable of operating systems using either rolling code or non-rolling code technology. The system will not transmit operating signals if the Vehicle Theft Security System is armed.

The universal transmitter cannot be repaired, and is available for service only as a visor assembly. If any part of the component is inoperative or damaged, the complete visor assembly must be replaced.