LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Tray Support Bracket >> Removal

Battery Tray Support Bracket: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the air cleaner housing, (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
  3. Remove the battery, (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - REMOVAL - GASOLINE ENGINE) .
  4. Remove the battery tray, (Refer to ELECTRICAL/BATTERY SYSTEM/TRAY - REMOVAL - GASOLINE ENGINE) .
  5. Raise the vehicle on a hoist, (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE) .
  6. Working under the vehicle, remove two of the battery tray support bracket retaining bolts.
  7. Lower the vehicle.
  8. Remove the remaining two battery tray support bracket retaining bolts and remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals