LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Engine Control >> Removal

Module-Engine Control: Removal

Fig 1: Battery Location
GC0041466Courtesy of DAIMLERCHRYSLER CORP.
1 - BATTERY
2 - PASSENGER SEAT
  1. Disconnect negative battery (1) cable.
  2. Remove air cleaner housing assembly (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
    Fig 2: Locating ECM And Bracket Assembly
    GC0043477Courtesy of DAIMLERCHRYSLER CORP.
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING BOLTS
    4 - AIR CLEANER HOUSING MOUNTING BRACKET
  3. Disconnect both ECM electrical connectors by pulling tabs at ends of connectors.
  4. Remove ECM bracket (2) retaining bolts (3) and remove ECM and bracket (2) assembly from vehicle. See Fig 2.
    Fig 3: Removing/Installing ECM And Bracket Assembly
    GC0043478Courtesy of DAIMLERCHRYSLER CORP.
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING NUTS
  5. Remove ECM to bracket retaining nuts (3) and remove ECM (1) from bracket (2). See Fig 3.
scientia non olet · About LEMON Manuals