LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Limited, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Coolant Level Sensor >> Removal

Coolant Level Sensor: Removal

Fig 1: Removing/Installing Coolant Level Sensor
GC0033971Courtesy of DAIMLERCHRYSLER CORP.
  1. Partially drain the cooling system. (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
  2. Disconnect the coolant level sensor harness connector (2).
  3. Depress the locking tabs and pull the coolant level sensor (1) from the coolant recovery reservoir.
scientia non olet · About LEMON Manuals