LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Water Pump >> Removal - Except SRT

Removal - Except SRT

Fig 1: Identifying Engine Appearance Cover
GC0032575Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Drain the cooling system. (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
  3. Remove the air cleaner inlet tubes (2).
  4. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.
    Fig 2: Removing/Installing Radiator Fan
    GC0033979Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the radiator fan. (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
    Fig 3: Removing/Installing Accessory Drive Belt
    GC0033987Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the accessory drive belt. (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
    Fig 4: Identifying Coolant By-Pass Hose & Lower Radiator Hose
    GC0033998Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove the belt tensioner. (Refer to COOLING/ACCESSORY DRIVE/BELT TENSIONERS - REMOVAL) .
    Fig 5: Identifying Coolant Bypass Hose & Lower Radiator Hose
    GC0033584Courtesy of DAIMLERCHRYSLER CORP.
  8. Disconnect the lower radiator hose (2).
  9. Disconnect the coolant by-pass hose (1).
  10. Remove the generator. (Refer to ELECTRICAL/CHARGING/GENERATOR - REMOVAL) .
    Fig 6: Identifying Accessory Drive Belt Idler Pulley & Water Pump Pulley
    GC0033999Courtesy of DAIMLERCHRYSLER CORP.
  11. Remove the water pump pulley (2).
  12. Remove the accessory drive belt idler pulley (1).
  13. Remove the water pump retaining bolts and the water pump.
scientia non olet · About LEMON Manuals