LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Steering >> Steering Column >> Rack & Pinion Power Steering System >> Column >> Ignition Lock Cable >> Removal

Ignition Lock Cable: Removal

Fig 1: Removing/Installing Ash Tray
GC0032409Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the ashtray (2) at front of center console. (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
    Fig 2: Identifying Cluster Cover & Lower Panel
    GC0032410Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the lower instrument panel (2). (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - REMOVAL) .
    Fig 3: Removing/Installing Ignition Lock Cable To Ignition/Starter Switch
    GC0032407Courtesy of DAIMLERCHRYSLER CORP.
  4. Press the locking tabs together and push the ignition lock cable (1) out of ignition/starter switch in the direction of the arrows.
    Fig 4: Identifying Shift Lever Cover
    GC0032411Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the shifter bezel (1). (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
    Fig 5: Removing/Installinging Ignition Lock Cable
    GC0032408Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the ignition lock cable (1) from electronic selector lever module by turning it 90° to the left and then pulling it straight out.
scientia non olet · About LEMON Manuals