LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.2L Engine - SRT (Service Information)) >> Rear Mount >> Installation

Rear Mount: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Rear Mount
GC0034472Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the rear mount on the transmission.
  2. Install the rear mount upper bolts (1). Tighten the bolts to 40 N.m (30 ft. lbs.).
  3. Lower the transmission on to the rear crossmember.
  4. Install the rear mount lower bolts (3). Tighten the bolts to 40 N.m (30 ft. lbs.).
  5. Remove the transmission jack.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals