LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.2L Engine - SRT (Service Information)) >> Engine Mount Bracket >> Installation >> Installation - Right

Installation - Right

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Right Engine Mount Brackets
GC0034470Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the engine mount brackets (2) on the engine block.
  2. Install the new bolts (1). Tighten to 20 N.m (15 ft. lbs.) plus 90° clockwise.
  3. Install the engine mounts. (Refer to ENGINE/ENGINE MOUNTING/FRONT MOUNT - INSTALLATION) .
scientia non olet · About LEMON Manuals