LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules) >> Controller Antilock Brake >> Installation

Controller Antilock Brake: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install CAB to the HCU.
  2. Install mounting bolts. Tighten to 2 N.m (16 in. lbs.).
  3. Install the wiring harness connector to the CAB and push down on the release to secure the connector.
  4. Install negative battery cable to the battery.
scientia non olet · About LEMON Manuals