LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System (Service Information)) >> Steering Angle Sensor >> Removal

Steering Angle Sensor: Removal

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery.
  2. Remove the airbag (Refer to ELECTRICAL/RESTRAINTS/AIRBAG CONTROL MODULE - REMOVAL) .
  3. Remove the steering wheel (Refer to STEERING/COLUMN/STEERING WHEEL - REMOVAL) .
  4. Remove the front cover. See Fig 1.
  5. Remove the upper and lower steering column covers. See Fig 1.
  6. Remove the clockspring (Refer to ELECTRICAL/RESTRAINTS/CLOCKSPRING - REMOVAL) . See Fig 1.
  7. Disconnect the electrical connector from the steering angle sensor. See Fig 1.
  8. Remove the steering angle sensor. See Fig 1.
Fig 1: Steering Angle Sensor
GC0036930Courtesy of DAIMLERCHRYSLER CORP.
1 - UPPER STEERING COLUMN COVER
2 - CLOCKSPRING
3 - STEERING ANGLE SENSOR
4 - LOWER STEERING COLUMN COVER
5 - FRONT COVER
6 - STEERING ANGLE SENSOR ELECTRICAL CONNECTION
scientia non olet · About LEMON Manuals