LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System (Service Information)) >> Lateral Acceleration Sensor >> Installation

Lateral Acceleration Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect the yaw rate/lateral acceleration sensor electrical connector. See Figure.
  2. Install the yaw rate/lateral acceleration sensor.
  3. Install the metal cover over top of the sensor.
  4. Install the screws securing the yaw rate/lateral acceleration sensor. See Figure. Tighten to 6 N.m (53 in.lbs).
  5. Install the bracket with the control modules. See Figure.
  6. Install the cover for the drivers seat. See Figure.
  7. Return the drivers seat to normal position.
  8. Reconnect the battery.
  9. Perform diagnosis quick check and road test the vehicle.
scientia non olet · About LEMON Manuals