LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System (Service Information)) >> Front Wheel Speed Sensor >> Installation

Front Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect separate wheel speed sensor cables with shrink-fit sleeves and shrink-fit tubing. See Figure.Only do this step if replacing the sensor. 
  2. Install the clamping bushing into the knuckle. See FigureOnly do this step if replacing the sensor or the clamping bushing was damaged. 
  3. Install the wheel speed sensor all the way into the front wheel hub the wheel speed sensor will self adjust when the vehicle is moved. See Figure.
  4. Install the front wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals