LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Suspension System) >> Rear >> Spring Shackle >> Installation

Spring Shackle: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spring shackle to the spring. Tighten to 90 N.m (66 ft. lbs.).
  2. Raise the rear axle while installing the spring shackle to the spring bracket. Tighten to 85 N.m (63 ft. lbs.).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals