Stabilizer Bar: Removal
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the stabilizer bar clamp bolts at the front axle. See Fig 1.
- Press the rubber mount outwards out of the brackets. See Fig 1.
- Remove the stabilizer links from the stabilizer bar. See Fig 1.
| 1 - RUBBER MOUNT |
| 2 - STABILIZER LINK |
| 3 - RUBBER MOUNT |
| 4 - NUT |
| 5 - RUBBER MOUNT |
| 6 - CLAMP BRACKET |
| 7 - BOLT |