Section 10 (Suspension System): Front: Bushings: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

Install the new control arm bushing into the control arm.
Press the new bushing into the control arm using special tool C-4212F and 9302-1 (Driver) with 9302-2 (Sizer cup) and 9302-4 (Receiver). See Fig 1.
Press the bushing in all the way until the lip is seated properly into the control arm.
Install the lower control arm to the vehicle (Refer to SUSPENSION/FRONT/LOWER CONTROL ARM - INSTALLATION) .

Fig 1: LCA Bushing Install

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL C-4212F (PRESS)

2 - SPECIAL TOOL 9302-1 (DRIVER)

3 - BUSHING

4 - SPECIAL TOOL 9302-2 (SIZER CUP)

5 - LOWER CONTROL ARM

6 - SPECIAL TOOL 9302-4 (RECEIVER CUP)