Section 1 (2.7L Engine (Service Information)): Plate-Flex: Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Locating Attaching Bolts, Backing Plate And Flex Plate

GC0015329

Courtesy of DAIMLERCHRYSLER CORP.

Install flex plate (1) and backing plate (3).
Apply MOPAR® Lock & Seal Adhesive to the flex plate bolts.
Install all flex plate bolts (2) finger tight.
Tighten flex plate bolts (2) to 95 N.m (70 ft. lbs.).
Install transmission (Refer to INSTALLATION ).