Section 1 (2.7L Engine (Service Information)): Mount-Rear: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Locating Transmission Mount, Crossmember and Bolts

Courtesy of DAIMLERCHRYSLER CORP.

Raise vehicle on hoist.
Remove cross member to mount bolts (2).
Place transmission jack under transmission pan and raise transmission.
Remove cross member attaching bolts and remove crossmember (1).

Fig 2: Removing Transmission Mount Bolts
Courtesy of DAIMLERCHRYSLER CORP.
Remove mount to transmission bolts (2), remove mount (1).