LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - Diesel >> Sensor-Crankshaft Position >> Removal

Sensor-Crankshaft Position: Removal

Fig 1: Locating Crankshaft Position Sensor
GC0039518Courtesy of DAIMLERCHRYSLER CORP.
1 - HEAT SHIELD
2 - CRANKSHAFT POSITION SENSOR
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the crankshaft position sensor heat shield (1). See Fig 1.
  4. Disconnect the crankshaft sensor wiring harness connector.
  5. Remove the bolt and sensor (2).
scientia non olet · About LEMON Manuals