2.7L Engine (Service Information): Collar-Structural: Removal

Fig 1: Locating Battery

Courtesy of DAIMLERCHRYSLER CORP.

1. Disconnect negative battery (1) cable located in trunk.
   Fig 2: Lower Splash Shield

   Courtesy of DAIMLERCHRYSLER CORP.
2. Raise vehicle on hoist.
3. Remove lower splash shield retaining bolts (1) and splash shield (2).
   Fig 3: Remove Trans Mount

   Courtesy of DAIMLERCHRYSLER CORP.
4. Remove transmission mount bolts (2).
5. Place a transmission jack under the transmission pan and raise engine and transmission.
   Fig 4: Locating Structural Collar Bolts

   Courtesy of DAIMLERCHRYSLER CORP.
6. Remove bolts attaching structural collar to oil pan (3) and transmission bell housing (4).
   Fig 5: Remove Structural Collar

   Courtesy of DAIMLERCHRYSLER CORP.
7. Move structural collar (1) to the right.
8. Remove structural collar (1) out towards the rear.