Regulator-Fuel Pressure: Installation

Fig 1: O-RING

Courtesy of DAIMLERCHRYSLER CORP.

Install o-ring.

Fig 2: Ground Ring
Courtesy of DAIMLERCHRYSLER CORP.
Install ground ring.

Fig 3: Remove/Install Fuel Pressure Regulator
Courtesy of DAIMLERCHRYSLER CORP.
Install Fuel Regulator and ground ring. Note location of ground ring.

Fig 4: Remove/Install Ground Wires
Courtesy of DAIMLERCHRYSLER CORP.
Install ground wire.

Fig 5: Retaining Clip
Courtesy of DAIMLERCHRYSLER CORP.
Install Fuel Pressure Regulator retaining clip.

Fig 6: Remove/Install Right Side Module
Courtesy of DAIMLERCHRYSLER CORP.
Install module into tank.

Fig 7: Right Side Module Orientation
Courtesy of DAIMLERCHRYSLER CORP.
Align marks on the module for proper orientation.

Fig 8: Tool 9430 Right Side Module
Courtesy of DAIMLERCHRYSLER CORP.
Install module lock-ring.
Use special tool #9340 to tighten right side module lock ring.
Connect the fuel supply line to module.

Fig 9: Access Cover Right Side Module
Courtesy of DAIMLERCHRYSLER CORP.
Install plastic access covers to floor pan right side.

Fig 10: Foam Pad Under Seat
Courtesy of DAIMLERCHRYSLER CORP.
Fold the foam pad covering access cover for modules back into place.

Fig 11: Pulliing Rear Seat Up
Courtesy of DAIMLERCHRYSLER CORP.
Install rear lower seat cushion

Fig 12: Rear Seat
Courtesy of DAIMLERCHRYSLER CORP.
Rear lower seat cushion installed.

Fig 13: Draining Fuel
Courtesy of DAIMLERCHRYSLER CORP.
Fill fuel tank.
Connect negative battery cable.
Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.