LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery - Diesel >> Sensor-Water In Fuel >> Removal

Sensor-Water In Fuel: Removal

  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
    NOTE: Capture and store any fuel spillage in appropriate containers
  3. Disconnect the water in fuel (WIF) electrical connector.
  4. Remove the WIF sensor retaining screws.
  5. Twist the WIF sensor so the tabs clear the retaining bracket.
  6. Gently pry up on the sensor and remove.
scientia non olet · About LEMON Manuals