LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L Engine (Service Information) >> Switch-Oil Pressure >> Removal

Switch-Oil Pressure: Removal

Fig 1: Locating Oil Pressure Switch
GC0015225Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise vehicle on hoist.
  2. Remove lower splash shield.
  3. Disconnect oil pressure switch (1) electrical connector.
  4. Position an oil collecting container under switch location.
  5. Remove switch by unscrewing from the engine block.
scientia non olet · About LEMON Manuals