LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L Engine (Service Information) >> Switch-Oil Pressure >> Installation

Switch-Oil Pressure: Installation

Fig 1: Locating Oil Pressure Switch
GC0015225Courtesy of DAIMLERCHRYSLER CORP.
  1. Apply Mopar® Thread Sealant to the switch threads.
  2. Install oil pressure switch (1).
  3. Connect electrical connector.
  4. Lower vehicle.
  5. Start engine and check for leaks.
  6. Check engine oil level and adjust as necessary.
scientia non olet · About LEMON Manuals