Sensor-Manifold Absolute Pressure: Installation: 3.5L

Fig 1: MAP Sensor Side View

Courtesy of DAIMLERCHRYSLER CORP.

1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor o-ring seal for cuts or tears.
   Fig 2: Remove/Install Sensor

   Courtesy of DAIMLERCHRYSLER CORP.
3. Position sensor into intake manifold.
   Fig 3: Turning Sensor 1/4 Turn

   Courtesy of DAIMLERCHRYSLER CORP.
4. Rotate sensor 1/4 turn clockwise for installation.
   Fig 4: Disconnecting/Connecting Electrical Connector

   Courtesy of DAIMLERCHRYSLER CORP.
5. Connect electrical connector to sensor.
6. Lock electrical connector.
7. Connect negative battery cable.