LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Town & Country Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Coolant Recovery Container >> Installation

Coolant Recovery Container: Installation

  1. Connect the recovery hose to container. See Figure.
  2. Position the recovery container on the frame rail. See Figure.
  3. Install the upper attaching screw and tighten to 7 N.m (60 in. lbs.). See Figure.
  4. Raise the vehicle on hoist.
  5. Install the lower attaching screws and tighten to 8.5 N.m (75 in. lbs.). See Figure.
  6. Lower the vehicle.
  7. Add coolant to container as necessary. (Refer to COOLING - STANDARD PROCEDURE) 
scientia non olet · About LEMON Manuals